Registering Folders
251
7
D Check that [Program / Change] is selected.
E Select the name whose folder you want to change, and then press [Folder].
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, folder name, e-mail ad-
dress, or IP-Fax destination.
F Press [Folder].
G Select the items you want to change.
H Press [Connection Test] to check the path is set correctly.
I Press [OK].
J Press [Exit].
Note
❒ To change the name, key display and title, see "Changing a Registered Name".
Reference
p.214 “Changing a Registered Name”
To change the protocol
A Press [SMB], or [NCP].
B A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
C Enter each item again.
Reference
p.242 “Registering an SMB Folder”
To Next Page
Loading...
