Ricoh Aficio MP C4501 User Manual

2. Press [Edit / Color].
3. Press [Color], and then press [Erase Color].
4. Select the color to be erased.
Up to four colors can be erased at the same time.
5. After selecting all colors to be erased, press [OK] twice.
6. Place the originals, and then press the [Start] key.
• The width of the color to be erased can be adjusted in five levels. When the width of the color is set
to [Wider] under Color Sensitivity in User Tools and red has been specified, colors close to orange
and purple will be erased. You can change the setting. For details about Color Sensitivity, see “Adjust
Color Image”.
• To cancel the selection, press the selected (highlighted) key.
• When the Full Color is selected, the full color counter will advance by “1”. When the Black & White
is selected, the mono-color counter will advance by “1”.
• For examples of what you can do with the color functions, see “Available Color Functions”.
• p.9 "Available Color Functions"
• p.238 "Adjust Color Image"
3. Color Copying
110
3

Ricoh Aficio MP C4501 Specifications

General

Print Speed	45 ppm (Black/Color)
Print Resolution	1200 x 1200 dpi
Max Paper Capacity	4, 400 sheets
Color Printing	Yes
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Copy Speed	45 cpm (Black/Color)
Fax Speed	33.6 kbps
Connectivity	USB, Ethernet
Scanner Type	Flatbed, ADF
Standard Paper Capacity	1, 200 sheets (2 x 550-sheet trays + 100-sheet bypass tray)