Functions Requiring Optional Configurations
Certain functions require special machine configuration and extra options as follows:
Type 1 and 2
Function Option
Shift Sort Internal shift tray, Finisher SR3050, Finisher
SR790, or Booklet Finisher SR3000
Stack Internal shift tray, Finisher SR3050, Finisher
SR790, or Booklet Finisher SR3000
Staple Finisher SR3050, Finisher SR790, or Booklet
Finisher SR3000
Staple (Center) Booklet Finisher SR3000
Punch Booklet Finisher SR3000 and punch unit
Type 3 and 4
Function Option
Shift Sort Internal shift tray, Finisher SR790, Finisher
SR3030, or Booklet Finisher SR3020
Stack Internal shift tray, Finisher SR790, Finisher
SR3030, or Booklet Finisher SR3020
Staple Finisher SR790, Finisher SR3030, or Booklet
Finisher SR3020
Staple (Center) Booklet Finisher SR3020
Punch Finisher SR3030 and punch unit, or Booklet
Finisher SR3020 and punch unit
• A finisher can be attached only if the bridge unit and either a paper tray unit or LCT is installed. The
Finisher SR3050 however requires the bridge unit only.
• Depending on the model you are using, some options may be provided as standard. For more
information, see “Options”, About This Machine.
18