Changing the number of sets
You can change the number of copy sets during copying.
• This function can be used only when the Sort function is selected.
1. While "Copying..." is displayed, press the [Clear/Stop] key.
2. Press [Change Quantity].
3. Enter the number of copy sets with the number keys, and then press the [ ] key.
4. Press [Continue].
Copying starts again.
• The number of sets you can enter in step 3 differs depending on when the [Clear/Stop] key is pressed.
Stack
Groups together copies of each page in a multi-page original.
If the internal shift tray or a finisher is attached, each time the copies of one page are delivered, the next
copy is shifted when delivered so you can separate each job by page.
2. Basic Copying
80
To Next Page
Loading...
