Horizontal size: 148.0 457.2 mm (5.83 18.00 inches), Vertical size: 148.0
305.0 mm (5.83 12.00 inches)
• Paper sizes and orientations that can be used in the Rotate Sort function are as follows:
• A4 , A5 , B5 JIS , 8
1
/
2
× 11 , 7
1
/
4
× 10
1
/
2
, 4
1
/
8
× 9
1
/
2
, C5 Env
, 16K
• When the number of copies exceeds capacity, copying stops. If this happens, remove copies from
the tray to resume copying. For details about the number of copy sheets that the output tray can
accommodate, see “Appendix”, About This Machine.
• p.235 "Input / Output"
Sample Copy
Use this function to check the copy settings before making a long copy run.
• This function can be used only when the Sort function is selected.
1. Select Sort and any other necessary functions, and then place the originals.
2. Enter the number of copy sets with the number keys.
3. Press the [Sample Copy] key.
One copy set is delivered as a sample.
4. If the sample is acceptable, press [Continue].
The number of copies made is the number specified, minus one for the proof copy.
• If you press [Suspend] after checking the results, return to step 1 to adjust the copy settings as
necessary. You can change the settings. However, depending on the combination of functions, you
may not be able to change some settings.
Finishing
79
To Next Page
Loading...
