Rotate copy
If the orientation in which your original is placed is different from that of the paper you are copying onto,
the machine rotates the original image by 90 degrees to fit it on the paper.
• This function works when Auto Paper Select or Auto Reduce / Enlarge is selected. See “Auto Paper
Select” and “Auto Reduce / Enlarge”.
• The default setting for Auto Tray Switching is [With Image Rotation]. You cannot use the Rotate Copy
function if this setting is changed to [Without Image Rotation] or [Off]. For details about Auto Tray
Switching, see “General Features”.
• The Rotate Copy function is not available in combination with certain finishing settings.
• p.60 "Auto Reduce / Enlarge"
• p.129 "Auto Paper Select"
• p.219 "General Features"
Manual Paper Select
Select the tray containing the paper you want to copy onto: a paper tray, the bypass tray, or the LCT.
4. Advanced Copying
130
To Next Page
Loading...
