1. Press the [User Tools/Counter] key.
2. Press [Copier / Document Server Features].
3. Press [Stamp].
4. Press [User Stamp].
5. Press [Program / Delete Stamp].
6. Press [Program], and then press the stamp number you want to program.
7. Enter the user stamp name (up to 10 characters) with the letter keys, and then press [OK].
8. Enter the horizontal size of the stamp with the number keys, and then press [ ].
9. Enter the vertical size of the stamp with the number keys, and then press [ ].
10. Place the original for user stamp on the exposure glass, and then press [Start Scanning].
The original will be scanned, and the stamp will be registered.
11. Press [Exit].
12. Press [Exit].
The display returns to the User Tools / Counter / Inquiry screen.
13. Press [Exit].
Exits settings and gets ready to copy.
Stamps
147
To Next Page
Loading...
