Ricoh Aficio MP C4501 User Manual

If a long copy job is in progress and you do not want to wait for it to finish, you can use this function to set
up the next copy job in advance. When the current copy job is finished, the next job will start automatically.
1. Press [New Job] when "Copying..." appears.
2. Be sure message "Ready" appears, and then make settings for the next copy job.
3. Place the originals, and then press the [Start] key.
All originals are scanned.
When the preset job is complete, a job preset confirmation dialog box appears.
4. Press [Exit].
The initial copy display appears.
After the current copy job, the next copy job starts automatically.
• You can switch the display to the current copy job by pressing [To Copying Screen]. You can switch
the display to the preset job by pressing [To Reserv. Screen].
• Preset copy jobs are registered under job numbers in the Reserv. Screen.
• You can confirm and delete preset jobs. For details about the procedures, see “Managing Jobs”.
• p.96 "Managing Jobs"
2. Basic Copying
42
2

Ricoh Aficio MP C4501 Specifications

General

Print Speed	45 ppm (Black/Color)
Print Resolution	1200 x 1200 dpi
Max Paper Capacity	4, 400 sheets
Color Printing	Yes
Duplex Printing	Yes
Monthly Duty Cycle	200, 000 pages
Type	Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Copy Speed	45 cpm (Black/Color)
Fax Speed	33.6 kbps
Connectivity	USB, Ethernet
Scanner Type	Flatbed, ADF
Standard Paper Capacity	1, 200 sheets (2 x 550-sheet trays + 100-sheet bypass tray)