3. Enter the number of copy sets using the number keys.
4. Press [OK].
5. Place the originals.
To confirm the type of finishing, press the [Sample Copy] key.
6. Press the [Start] key.
• If you are copying from the exposure glass, a single copy of each original is made first. If the first
copy set is acceptable, you can make the remaining copy sets by pressing the [ ] key. The time
required for copy sets to be delivered varies depending on the print settings.
• When placing originals on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so that the first page is on the top.
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• You can change the settings for the Sort function under Input / Output in User Tools. For details, see
“Input / Output”.
• Paper sizes and orientations that can be shifted when delivered to the shift tray are as follows:
• Type 1 and 2
• Internal shift tray
• Standard size
A3 , A4 , A5 , A6 , B4 JIS , B5 JIS , B6 JIS , 12 × 18 , 11 × 17
, 11 × 15 , 10 × 14 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 ,
8
1
/
4
× 14 , 8
1
/
4
× 13 , 8 × 13 , 8 × 10 , 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 8K , 16K , 4
1
/
8
× 9
1
/
2
, 3
7
/
8
× 7
1
/
2
, C5 Env , C6 Env ,
DL Env
• Custom size
Horizontal size: 148.0 457.2 mm (5.83 18.00 inches), Vertical size: 90.0 305.0
mm (3.55 12.00 inches)
• Finisher shift tray for Finisher SR790
• Standard size
A3 , A4 , A5 , B4 JIS , B5 JIS , 12 × 18 , 11 × 17 , 11 × 15 , 10
× 14 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 , 8
1
/
4
× 14 , 8
1
/
4
× 13 ,
8 × 13 , 8 × 10 , 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 8K , 16K
• Finisher shift tray for Finisher SR3050
• Standard size
A3 , A4 , B4 JIS , B5 JIS , 11 × 17 , 11 × 15 , 10 × 14 ,
Finishing
77
To Next Page
Loading...
Need help?
General
