When Finisher SR3030 is attached (Type 3 and 4):
When Booklet Finisher SR3020 is attached (Type 3 and 4):
3. Enter the number of copies with the number keys.
4. Press [OK].
5. Place the originals, and then press the [Start] key.
• When placing originals on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so that the first page is on the top.
• When placing originals on the exposure glass, or in the ADF using the Batch mode, press the [ ] key
after all the originals have been scanned.
2. Basic Copying
82
To Next Page
Loading...
