See “Turning On/Off the Power”.
5. Operation switch
Press to turn the power on (the operation switch indicator lights up). To turn the power off, press again (the
operation switch indicator goes off).
See “Turning On/Off the Power”.
6. Control panel
See “Control Panel”.
7. Front Cover
Open to access the inside of the machine.
8. Exposure glass
Place originals here face down.
9. Paper trays (Trays 1 - 3)
Load paper here.
1. Ventilation holes
Prevent overheating.
2. Bypass Tray
Use to copy or print onto OHP transparencies, adhesive labels, translucent paper, envelopes, and custom size
paper.
1. Getting Started
32
To Next Page
Loading...
