Windows 98SE/Me/2000 Professional SP1 or later/2000 Server SP1 or later/2000
Advanced Server SP1 or later/XP Professional/XP Home Edition
• When installing only SmartDeviceMonitor for Client:
Windows 95 SP1/98/98SE/Me/2000 Professional SP1 or later/2000 Server SP1 or
later/XP Professional/XP Home Edition
Windows NT 4.0 SP5 or later
SmartDeviceMonitor for Admin
This section describes the file path and available functions of SmartDeviceMonitor for Admin.
SmartDeviceMonitor for Admin is an application that uses TCP/IP and IPX/SPX to monitor network printers.
It can monitor multiple network printers using IP address. We recommend that network administrators use
this application.
File path
SmartDeviceMonitor for Admin is stored in the following folder in the CD-ROM labeled “Printer Drivers
and Utilities”:
\NETWORK\DEVMON\ADMIN\DISK1
Operating system Protocol stack
Windows 95 / 98 / Me TCP/IP provided with Windows 95 / 98 / Me
IPX/SPX provided with Windows 95 / 98 / Me
NetWare Client provided with Windows 95 / 98
Novell Client provided with Windows 95 / 98
Windows 2000 TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client provided with Windows 2000 or Windows NT
Windows XP TCP/IP provided with Windows XP
IPX/SPX provided with Windows XP
NetWare Client provided with Windows XP
Novell Client provided with Windows XP
Windows Vista TCP/IP provided with Windows Vista
Novell Client provided with Windows Vista
Windows Server 2003 TCP/IP provided with Windows Server 2003
Software and Utilities Included on the CD-ROM
67