Message Cause Solution
"Fold mode has been
cancelled."
Fold mode has been
cancelled.
Check the paper settings.
Fold mode is automatically cancelled in
the following cases:
• If the bypass tray is selected as the
output tray.
• If a paper type that cannot be
folded is specified.
• If a sheet that is the wrong size or
in the wrong orientation is loaded.
• If fan fold is specified for a sheet
that is 319 mm (12.5 in) or less in
length.
"HDD is full." The hard disk became full
while printing a Sample Print,
Locked Print, Hold Print or
Stored Print file.
Delete unneeded files stored in the
machine.
Alternatively, reduce the data size of the
Sample Print, Locked Print, Hold Print or
Stored Print file.
"HDD is full." When printing with the
PostScript 3 printer driver, the
HDD's capacity for fonts and
forms has been exceeded.
Delete unneeded forms or fonts
registered in the machine.
"I/O buffer overflow." An input buffer overflow
occurred.
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• In [Printer Features], under [Host
Interface], select [I/O Buffer], and
then set the maximum buffer size to
a larger value.
• Reduce the number of files being
sent to the machine.
3. Troubleshooting When Using the Printer Function
44
To Next Page
Loading...
