Message Cause Solution
"Information for user
authentication is already
registered for another user."
The user name for LDAP or
RDH authentication was
already registered in a
different server with a
different ID, and a
duplication of the user name
occurred due to a switching
of domains (servers),etc.
Contact the administrator.
"Insufficient Memory" A memory allocation error
occurred.
On the RPCS printer driver's [Print
Quality] tab, open the [Change User
Settings...] dialog box, and then, on the
[Image Adjustments] tab, specify a
lower value for [Resolution:].
"Memory Overflow" • The memory is full.
• Maximum capacity of
PostScript 3 display list
has been exceeded.
• On the RPCS printer driver's [Print
Quality] tab, open the [Change
User Settings...] dialog box, and
then, on the [Image Adjustments]
tab, specify a lower value for
[Resolution:].
• On the PostScript 3 printer driver,
Reduce the value of [Resolution].
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
If this message continues to appear after
taking these steps, decrease the number
of files sent to the machine.
"Memory Retrieval Error" A memory allocation error
occurred.
Turn off the main power switch, and
back on again. If the message appears
again, replace the RAM.
"No response from the server.
Authentication has failed."
A timeout occurred while
connecting to the server for
LDAP authentication or
Windows Authentication.
Check the status of the server.
Messages Displayed When Using the Printer Function
45
To Next Page
Loading...
