9. Mount the new carriage, and then attach the side cover with ink tubes.
• Before you re-assemble the printer, be sure to read through the "Re-installation" tips described
in the next section.
10. After re-assembling the printer, do the SP settings for after carriage replacement. (See "After
Replacing the Carriage" at the end of this section.)
Re-installation
Engaging the carriage to the timing belt
If the carriage is insufficiently engaged to the timing belt, the movement of the carriage becomes
disordered, resulting in problems such as fat or blurred printed text.
Correct engagement
To prevent defective printing, engage the carriage to the timing belt [A] with the belt inserted into
the carriage's engaged part thoroughly so that there is no clearance between the carriage and belt
[B].
Incorrect engagement (likely to cause a malfunction)
Carriage Unit
133
To Next Page
Loading...
