Ricoh Aficio SG 7100DN - Display Count: Air Detected at Power on; Display Count: Air Detection Frequency; Display Count: Air Purges;Re-Fillings after Feed Pump Idle Time; Display Count: Ink Circulation Sequence after Humidity Change

7-002-038 SND LQD TUP:H2 Print Head 2 (Y / M)
Use this SP to display the number of ink circulation sequence performed.
Display Count: Ink Circulation Sequence after Humidity Change
7-002-041 SND LQD TUP:H:H1 Print Head 1 (C / K)
7-002-042 SND LQD TUP:H:H2 Print Head 2 (Y / M)
Use this SP to display the number of ink circulation sequence performed if humidity
change of 15% of above occurs within six hours after the last air-purge/ink tank re-
filling.
Display Count: Air Purges/Re-fillings after Feed Pump Idle Time
7-002-045 LONG PUMP AIR:H1 Print Head 1 (C / K)
7-002-046 LONG PUMP AIR:H2 Print Head 2 (Y / M)
DNA This Series (J027/J028/J029)
Display Count: Air Detected at Power On
7-002-049 AIR CNT:P:T1 Print Head Tank 1 (Cyan)
7-002-050 AIR CNT:P:T2 Print Head Tank 2 (Black)
7-002-051 AIR CNT:P:T3 Print Head Tank 3 (Yellow)
7-002-052 AIR CNT:P:T4 Print Head Tank 4 (Magenta)
Use this SP to display the number of times air was detected by the air sensor a print
head tank at power on.
Display Count: Air Detection Frequency
7-002-055 AIRLEAKCHK:TH Threshold
7-002-056 AIRLEAKCHK:TIM Time/Date
2. Appendix: SP Mode Tables
54