5. Push in the ink collector [B] until you hear it snap and lock in place.
6. Close the right front cover.
• The ink collector unit has an internal ID chip that automatically resets the counter for the ink
collector unit. No SP adjustment is required.
7. Discard the used ink collector unit.
• Obey the local laws and regulations regarding disposal of items like the full ink collector unit.
• Never attempt to open and clean a full ink collector unit and use it again.
Covers
Cover Names
[A] Top Cover
[B] Canopy Cover
[C] Front Cover Brand Logo attached
[D] Operation Panel
[E] Right Front Cover Product Logo attached
[F] Output Tray
4. Replacement and Adjustment
50
To Next Page
Loading...
