Overview
Before You Begin...
What This Manual Contains
This Service Manual covers J034 model of this printer series. This is a brief summary of the differences
between J034 and that of base machine J028.
J028
The NIC is mounted on the CTL board.
This model is PCL compatible.
J034
The NIC is mounted on the CTL board.
This model is not PCL compatible.
This table below compares the J034 model with that of base machine J028. The size and number of
components differ in some cases but their basic design and function are almost the same. The removal
procedures described in the manual apply to this model.
J028 J034
Main Components
Print Heads x2
Maint. Unit Common
Ink Supply Unit Common
Ink Collector Unit Common
Ink Cartridges S size, M size
Horizontal Encoder Film Common
Duplex Std Std
Wireless LAN No No
PCBs
CTL Board*
1
FIGO ZICO
1. Product Information
18
To Next Page
Loading...
