• The adjustment value appears to the left of the lightest gray square with straight horizontal
lines on both sides.
• If this number is "+2", for example, then the adjustment value is "+2".
• If horizontal lines beside the gray square are broken, look at where the lines are broken in the
opposite direction.
• For example, if the "+2" square is the lightest gray square and the "+6" lines are broken, then
the best adjustment value is between "+3" and "+5".
5.
[
/Menu]> "Adjustment"> [#Enter].
6. Press [ /Menu] or [ ] until the number of the pattern that you selected in Step 4 appears.
7. [#Enter]. This completes the adjustment.
8. Push [ /Menu] to leave the menu mode.
4. Replacement and Adjustment
142
To Next Page
Loading...
