SC Pattern Error Name / Detection Criteria / Major Cause / Solution
89900 D
Software performance error
If the processing program shows abnormal performance and the program is
abnormally ended, this SC is issued.
CTL board defective
Software defective
Turn the main power switch off and then back on.
Update the firmware on the CTL board.
Replace the CTL board.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
91505 A
The external controller function abnormal
The applications for the external controller fail or writing on the EEPROM fails.
The external equipment fails.
Firmware uploading failure
EEPROM (NV memory) error
EEPROM (NV memory) connection error
CTL board error
The external equipment error
Update the firmware. Replace the external equipment. Replace the CTL board.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
93200 D
Thermal error in the DRV circuit
Turn the main power switch off and then back on.
SC Pattern Error Name / Detection Criteria / Major Cause / Solution
93300 D
HRB fuse blown
Turn the main power switch off and then back on.
Error Codes
223
To Next Page
Loading...
