Ricoh Aficio SG 7100DN - Page 249

Sub Scan Registration.........................................................................................................................33
Carriage...............................................................................................................................................35
Main Scan Registration.......................................................................................................................
35
Charge Width Setting Mj1,2 : Simplex (DFU)..................................................................................37
Charge Width Setting Mj3,4,5 : Simplex (DFU)..............................................................................37
Charge Width Setting Mj1,2 : Duplex (DFU)...................................................................................38
Charge Width Setting Mj3,4 : Duplex (DFU)...................................................................................38
Calibrate Humidity/Temperature for Duplex (DFU)........................................................................39
Set Charge Area.................................................................................................................................39
Set Charge for Target Market............................................................................................................40
SP2-XXX........................................................................................................................................................41
SP3-XXX........................................................................................................................................................41
Adjust Printhead Gap..........................................................................................................................41
Set Print Head Rank (Wave)..............................................................................................................42
Set Print Head Rank (Voltage)...........................................................................................................43
DAC Adjustment Value.......................................................................................................................43
Ink Consumption in the Print Cartridge..............................................................................................43
Margin for Detecting if the Print Cartridge Has Run out of Ink........................................................44
Set Threshold for Near-Full Alert.......................................................................................................44
Reset and Restoration Settings...........................................................................................................45
Maintenance, Replacement...............................................................................................................45
SP4-XXX........................................................................................................................................................45
SP5-XXX........................................................................................................................................................46
Plotter Settings.....................................................................................................................................46
Input Check: Sensors...........................................................................................................................46
Input Check: Sensors...........................................................................................................................47
Input Check: Temperature and Humidity...........................................................................................47
Input Check: Air...................................................................................................................................48
Input Check: Ink Cartridge Set Sensors.............................................................................................48
Input Check: Ink Cartridge Levels......................................................................................................49
Encoder Readings...............................................................................................................................49
Board Temperature Sensors...............................................................................................................49
Area Selection.....................................................................................................................................50
2