No. Message Action
43
Paper Misfeed Remove Duplex
or/ Tray2 Rear Cover remove
misfeed
Paper has jammed in or failed to feed from the duplex unit or
feed unit of Tray 2. Remove the paper.
44
Remove Misfeed Duplex Unit/
Remove Misfeed from Duplex
Unit
Paper has jammed in or failed to feed from the duplex unit.
Remove the paper from the duplex unit.
45 Reset Duplex Unit correctly
The duplex unit is not mounted correctly and/or the duplex
unit cover is open. Mount the duplex unit correctly and close
the duplex unit cover.
46
Paper Misfeed Remove all
Rear/Covers then remove
misfeed
The fed paper has failed to reach the Tray 2 relay sensor.
Remove the paper.
47
Paper Misfeed remove Tray
2/or Rear Covers, remove
misfeed
The paper fed from Tray 2 is jammed in the Tray 2 paper
path.
Remove the paper.
48
Paper Misfeed remove Rear
Covers, remove misfeed
The paper fed from the tray is jammed in the Tray paper
path.
49
Paper Misfeed remove Tray 2
or Rear Covers, remove
misfeed
The paper fed from Tray 2 is jammed in the Tray 2 paper
path.
Remove the paper.
5. ERR
No. Message Action
50
SCXXX-XX Power Off On /
Call Service if error reoccurs
An error has occurred. Cycle the machine off/on. If this
message is displayed again, call for service.
Error Codes
79
To Next Page
Loading...
