1 Ricoh
3 LANIER
4 SAVIN
6 NRG
5. Select the PnP code.> [#Enter]> [Escape]> [Escape].
SP No.
5807001
6. Enter "5807001"> [#Enter].
0 Japan
1 NA
2 EU
7. Select the destination> [#Enter]> [Escape].
8. Exit the SP mode.
(3) Initializing the NVRAM
1. Enter the SP mode.
2. Select "Engine Maint."> [#Enter].
SP No.
5831001
3. Enter "5831001"> [#Enter].
4. Press [#Enter].
5. Press [#Enter].
OK?
6. Press [#Enter].
7. Exit the SP mode.
8. Turn the machine off, and then turn it on again.
Changing destination and PnP code influences the following settings:
Destination
4. Replacement and Adjustment
84
To Next Page
Loading...
