Specifying the destination using the One Touch buttons
This section describes how to select a destination registered as a Quick Dial entry using One Touch
buttons.
1. Press the [Facsimile] key.
2.
Press the One Touch button to which the desired Quick Dial entry is registered.
Press the [Shift] key if you want to use Quick Dial entries Nos. 11 to 20 before pressing a One
Touch button.
• You can check the registered names and fax numbers by printing a report.
• For details about registering the Quick Dial entries, see p.203 "Registering Fax Destinations".
• For details about printing the Quick Dial list, see p.287 "Printing Lists/Reports".
Specifying the destination using Speed Dial
This section describes how to select a destination registered as a Speed Dial entry.
Sending a Fax
215
To Next Page
Loading...
