Preparation for sending faxes from a computer connected via USB
1. Connect the machine to a computer using a USB cable.
For details, see p.67 "Connecting with a Computer Using a USB Cable".
2. Install the LAN-Fax driver on the computer.
For details, see the instructions provided on the driver CD-ROM.
3. Register LAN-Fax destinations in the LAN-Fax Address Book.
For details, see p.223 "Configuring the LAN-Fax Address Book".
Preparation for sending faxes from a computer connected via network
1. Connect the machine to the network.
For details, see p.69 "Connecting with a Network Cable".
2. Specify the network settings, such as the machine’s IP address.
For details, see p.74 "Configuring the Machine".
3. Install the LAN-Fax driver on the computer.
For details, see the instructions provided on the driver CD-ROM.
4. Register LAN-Fax destinations in the LAN-Fax Address Book.
For details, see p.223 "Configuring the LAN-Fax Address Book".
Feature Highlights
33
To Next Page
Loading...
