Cleaning the Friction Pad and the Paper Feed
Roller
If the friction pad or paper feed roller is dirty, a multi-feed or misfeed might occur. In this case, clean the
friction pad and paper feed roller as follows:
• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take
these precautions could result in fire or electric shock.
• Do not pull out the paper tray forcefully. If you do, the tray might fall and cause an injury.
• Do not put your hands inside the printer when the input tray is removed. Some internal parts
become hot and are a burn hazard.
• Do not use chemical cleaner or organic solvent such as thinner or benzine.
1. Turn off the power switch.
2. Unplug the power cord from the wall outlet. Remove all the cables from the printer.
3. Pull out tray 1 carefully with both hands.
To Next Page
Loading...
Need help?
General