If you cannot find the misfed paper, look inside the printer.
3. Close the front cover with both hands carefully.
• When closing the front cover, push the upper side of the cover firmly. After closing the cover, check
that the error is cleared.
When "Misfd: Stnd Tray" Appears
"Misfd: Stnd Tray" appears when a paper jam has occurred in the fusing unit.
Open the front cover and remove the paper following the same procedure as for internal path.
• For details about the procedure, see p.144 "When "Internal Misfeed" Appears".
When Paper is Jammed
149
To Next Page
Loading...
