Installing Option
This section describes how to install option.
By installing option, you can improve the printer performance and have an expanded variety of features
to use. For the specifications of each option, see p.158 "Specifications".
Attaching Paper Feed Unit
• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and
electric shock hazard.
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
• Before installing or removing options, always disconnect the power cord plugs from the wall
outlet and allow time for the main unit to fully cool. Failing to take these precautions could result
in burns.
• The printer weighs approximately 23.8 kg (52.5 lb.). When moving the printer, use the inset
grips on both sides, and lift slowly in pairs. The printer will break or cause injury if dropped.
• Lifting the paper feed unit carelessly or dropping may cause injury.
• Before moving the printer, unplug the power cord from the wall outlet. If the cord is unplugged
abruptly, it could become damaged. Damaged plugs or cords can cause an electrical or fire
hazard.
• Tray 1 is required to print using the optional paper feed unit. Without Tray 1, paper jams will occur.
• The printer should always be lifted by two people.
• Do not grip on the tray area when lifting the printer.
2. Installing the Printer and Options
38
To Next Page
Loading...
Need help?
General