2. Press the [ ] or [ ] key to display [List/Test Print], and then press the [OK] key.
Menu:
List/Test Print
3. Press the [ ] or [ ] key to display [Config. Page], and then press the [OK] key.
List/Test Print:
Config. Page
The configuration page will be printed.
4. Press the [Menu] key to return to the initial screen.
• If printing is not normal, check to see if an error message appears on the display.
• If there is an error message, see p.123 "Error & Status Messages on the Control Panel".
Installing the Printer
37
To Next Page
Loading...
