To avoid paper jams, make sure the tray is securely inserted.
• To reinsert the extender, you might have to push it with moderate force.
• The upper limit differs depending on paper type; thin paper or thick paper. Check the label inside
the tray to confirm the upper limit.
• The remaining paper indicator on the right front side of the paper tray shows approximately how
much paper is remaining.
• For details about paper types supported by the printer, see p.61 "Paper Recommendations".
• For details about the paper settings, see Software Guide.
Setting a paper size using the control panel
To load paper whose size cannot be selected automatically, set the paper size on the control panel.
Follow the procedure described below to set the paper size.
5. Paper and Other Media
80
To Next Page
Loading...
