• For details about paper types supported by the machine, see p.57 "Paper and Other Media".
• For details about the paper settings, see p.80 "Setting a paper size using the control panel" and
p.83 "Specifying a paper type for Tray 1 and Tray 2".
Loading Envelopes in Bypass Tray
• Check there is no air in the envelopes before loading.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten their leading edges (the edge going into the printer) by running a
pencil or ruler across them.
• Some kinds of envelope might cause misfeeds, wrinkles or print poorly.
• Print quality on envelopes may be uneven if parts of an envelope have differing thicknesses. Print
one or two envelopes to check print quality.
• In a hot and humid environment, the envelope might be output creased or improper printing
quality.
1. Insert the top edge of the paper into the printer.
To Next Page
Loading...
Need help?
General