Alert Resolving is set for sending e-mail, but no Alert-resolved e-mail is sent.
• If the power of the main unit is turned off after an Alert occurs, the Alert is resolved during the time the
power is off: no Alert-resolved e-mail is sent.
Alert Occurrence and Alert Resolving are set for sending e-mail, but while no Alert Occurrence
mail is received, Alert-resolved e-mail is received.
• Alert-notification e-mail is not sent if the problem is resolved before sending. However, an Alert-
resolved e-mail is sent.
Alert-notification level was changed, and e-mail stopped arriving.
• If an Alert-notification e-mail, set with the earlier notification level, arrives, later e-mail will not be sent,
even if the notification level is changed after.
When no date information is included in sent e-mail, the mail server has a malfunction.
• Configure the setting for obtaining time information from the SNTP server. Refer to the Web Image
Monitor's Help to the settings.
Printing using Bluetooth is slow.
• When using the optional Bluetooth interface unit, do the following:
• Transmit fewer print jobs.
• Make sure no wireless LAN or other Bluetooth devices are in use.
Interference may occur with the wireless LAN interface board. Such interference may affect the
transmission speed and other functions.
• Transmissions between the client computer and the printer can be blocked by obstructions. Move
the printer or client computer if necessary.
When you use a Bluetooth connection, print jobs are transmitted relatively slowly.
Additional Troubleshooting
221
To Next Page
Loading...
Need help?
General