Ricoh Aficio SP C820DN

Resetting the Gradation Correction Value to the Initial Value
1. Press the [Menu] key.
BMW028S
2. Press the [ ] or [ ] key to select [Maintenance], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Quality Maintenance], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Color Calibration], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [Reset Setting], and then press the [OK] key.
A confirmation message appears. Press [Yes] to reset Calibration setting.
8. Adjusting the Printer
192
8