Power on and off
This section explains how to turn on or off the printer's power.
• It is dangerous to handle the plug with wet hands. Doing this may result in receiving an electric shock.
• Do not turn off the power switch before following the shutdown procedure shown here. Doing so can
result in damage to the hard disk or memory, leading to malfunction.
• Do not physically disturb the printer while printing is in progress. Doing so may damage the printer.
Turning on the Power
This section explains how to turn on the printer's power.
1. Make sure the power switch is set to Off.
2. Plug the power cord into the rear of the printer.
Make sure the power cord is plugged securely into the wall outlet.
Turn the power switch off when plugging and unplugging the power plug.
Power on and off
25
To Next Page
Loading...
Need help?
General