35
5. Align the markers at (1) and (2).
1
2
CEZ210
6. Use two black screws to reattach the side plate.
7. Push the middle tray (Tray 4) back inside the machine.
8. Close the wide LCT front cover.
9. Turn on the main machine and wait for the machine to warm up.
10. Access the Adjustment Settings for Skilled Operators menu. (See p.
18
"Accessing the Adjustment Settings for Skilled Operators".)
11. Reset the replaceable parts counter for the replaced rollers. (See p.20
"Resetting the Replaceable Parts Counter".)
To Next Page
Loading...
Need help?
General
