Bit Switch 1
BIT FUNCTION
DATA
COMMENTS
Default reception mode
0
Bit 1 Bit 0
Setting These bits state the default reception mode setting. The recep-
0 0
Manual
tion mode returns to this setting when power is switched on.
1 0 1
Not Used
1 0
Automatic
1 1
Automatic
Default resolution
2
Bit 3 Bit 2
Setting
These bits state the default resolution setting. The machine’s
0 0
Standard
resolution returns to this setting when power is switched on
3 0 1
Detail
and when the machine returns to standby after transmission.
1 0
Fine
1 1
Fine
Default contrast
4
Bit 5 Bit 4
Setting
These bits state the default contrast setting. The machine’s
0 0
Normal
contrast returns to this setting when power is switched on and
5 0 1
Lighten
when the machine returns to standby after transmission.
1 0
Darken
1 1
Darken
6
Halftone default set- 0: Off 1: On
1: Halftone will be enabled when the machine is in standby
ting mode. The user must press the Halftone key to switch
halftone off if halftone mode is not required.
7
Not used
Do not change the factory setting.
2-37
To Next Page
Loading...
