Bit Switch 12
BIT
FUNCTION DATA
COMMENTS
5
On hook check
0: Disabled
1: The handset hook switch status is checked after each digit,
when user picks up 1: Enabled
to check whether the user has hung up or not.
the hand set and
dials the machine’s
operation panel
6
Not used
Do not change the factory setting.
7
On Hook Dial 0: Enabled
If this bit is 0, the On Hook Dial feature is available. The user
1: Disabled
can make telephone calls by pressing the Voice Request key
then dialling the number.
2-62
To Next Page
Loading...
