Bit
Switch 15
BIT
FUNCTION
DATA
COMMENTS
o
Action if wrong
O: Nothing is printed
O: Nothing is printed if the user enters the wrong password
password is
1: The first page is when trying to print a confidential file with Function 76.
entered when print- printed
1: If the user enters the wrong password, only the first page
ing a confidential
will be printed. This could only be useful if the first page of
file (FAX85 only) received fax messages is always a cover sheet, informing of
who the sender is and who the fax is intended for; that person
can then be informed that a confidential message has arrived.
1
Remaining memory O: % 1: S
O:
lhe
remaining memory space is displayed as a percentage.
space display units
1: The approximate number of pages that can
be
stored in the
remaining memory is displayed.
2
Katakana charac- 0: Enabled If a customer requires Japanese Katakana characters, set this
ters 1: Disabled
bit to O.
3
Not used Do not change the factory setting.
4
Not used Do not change the factory setting.
5
Not used
Do not
change
the factory
settincj
6
Error code listing
O: Disabled
If this bit is 1, error codes will not be printed
on
error reports.
on error reports
1: Enabled To see the error codes, use
sewice
function 94 (Service
Report or Error Code
Display).
7
Protocol dump list
O:
Disabied
This is only used for communication troubleshooting. It shows
output
1: Enabled the content of the transmitted facsimile protocol signals. Al-
ways reset this bit to O after finishing testing.
Bit
Switches 16
to
1
F
are not used in this machine.
2-66
To Next Page
Loading...
