Bit Switch 14 - Continued
BIT
FUNCTION
DATA
COMMENTS
6
SAF file list output 0: Enabled
The SAF file list tells the user what messages are stored in the
after memory file
1: Disabled memory. It is only used with FAX85.
clearance
7
Substitute recep-
1: Forward the files If the machine has a mechanical problem and the user wants
tion file forwarding
to print the files but the problem cannot be cleared immedi-
ately, set this bit to 1. The files will all be sent to the forwarding
terminal programmed by RAM address (FAX80) or with Func-
tion 86 (FAX85). If there is more than one file, all the files will
be sent but the line will be cut after sending each file. After for-
warding all files, the bit will be reset to 0 automatically. Con-
fidential files are also forwarded.
This function is not the same as the forwarding feature of the
FAX85 (Function 58). In Function 58, all incoming messages
are automatically forwarded to the terminal programmed with
Function 86. Substitute and confidential receptions are not for-
warded.
2-65
To Next Page
Loading...
