Ricoh G-P3 - Page 145

1101 [ToneCtlSet]
1101 001 Tone (Factory) *CTL
Recalls a set of gamma settings. This can be either a)
the factory setting, b) the previous setting, or c) the
current setting.
1101 2 Tone (Prev.) *CTL
1101 3 Tone (Current) *CTL
1102
[ToneCtlSet] *CTL
Sets the printing mode (resolution) for the printer gamma adjustment. The asterisk (*)
shows which mode is set.
• 00: *1200x1200Photo
• 01: 600x600Text
• 02: 1200x1200Text
• 03: 1200x600Text
• 04: 600x600Photo
• 05: 1200x600Photo
1103 [PrnColorSheet]
1103 001 ToneCtlSheet
Prints the test page to check the color balance before
and after the gamma adjustment.
1103 002 ColorChart
1104
[ToneCtlValue]
Adjusts the printer gamma for the mode selected in the Mode Selection menu.
1104 001 Set Black 1 *CTL
[0 to 255 / 16 / 1/step]
1104 021 Set Cyan 1 *CTL
1104 041 Set Magenta 1 *CTL
1104 061 Set Yellow 1 *CTL
1104 002 Set Black 2 *CTL
[0 to 255 / 32 / 1/step]
1104 022 Set Cyan 2 *CTL
1104 042 Set Magenta 2 *CTL
1104 062 Set Yellow 2 *CTL
5. Service Tables
144
5