4. Install the yellow toner bottle first. Holding the toner bottle horizontally ¬ with the locking lever on
the upper side, install the toner bottom first, and then move the locking lever to the triangle mark Á.
5. Turn the locking lever to the circle mark. Pull the locking lever toward front side of the printer, until it
locks and clicks into place.
• Do not repeatedly insert and remove toner bottles. This causes toner leakage.
6. Do the same procedure to install the other three bottles: cyan (C), magenta (M), and black (B).
7. Close the top cover.
Loading Paper
1. Pull out tray 1 [A] of the printer until it stops.
2. Lift it slightly, and then pull it out.
1. Installation Procedure
24
To Next Page
Loading...
