Ricoh G-P3 - 4 Troubleshooting; Process Control Results

4. Troubleshooting
Process Control Results
The table below lists the process control results shown in SP 3821.
Number Result Notes
10 Success No error
21 ID sensor correction error SC 400
22 ID sensor: LED adjustment error SC 418
31 Charge bias correction error SC 300 to 307
51 High Vmin (Bk), High K2 (Color) error
SP 3145 (see the note below the
table)
52 Low K2 (Color) error
SP 3146 (see the note below the
table)
53 High K5 error
SP 3147 (see the note below the
table)
54 Low K5 error
SP 3147 (see the note below the
table)
55 High development gamma
Gamma > 5.0 (see the note
below the table)
56 Low development gamma
Gamma < 0.5 (see the note
below the table)
57 Development bias adjustment error
Vk >150V (see the note below
the table)
58 Development bias adjustment error
Vk < -150V (see the note below
the table)
90 No process control -
99 Not successful
Interrupt during the process
control (e.g. Door open)
91
4