Ricoh G-P3 - Laser Synchronizing Detector Boards

2. Top cover [A] ( x 5, tabs x 4)
• Do not touch the mirrors. Clean with an optics cloth if you touch the mirrors.
3. Polygon motor cover [B] ( x 3), shading plate [C], sponge [D]
4. Polygon mirror motor [E] ( x 4), drive board [F] ( x 2,  x 1, 1 flat cable)
Laser Synchronizing Detector Boards
1. LDU (* LD unit)
2. Top cover
3. Synchronizing detector board unit [A] ( x 1)
Laser Optics
57
3