EasyManua.ls Logo

Ricoh G-P3 - Controller Options; Overview

Ricoh G-P3
413 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Controller Options
The following options are available for this machine; refer to the “Hardware Guide”.
Hard Disk Drive
IEEE1284
IEEE802.11a/g,g
Gigabit Ethernet
Bluetooth
Camera Direct Print Card
Data Storage card
VM Card
The following options are available for this machine; refer to the “Security Guide”.
Data Overwrite Security Unit
HDD Encryption Unit
Overview
This machine has I/F card slots for optional I/F connections and SD card slots applications.
After you install an option, check that the machine can recognize it.
I/F Card Slots
Slot A is used for one of the optional I/F connections (only one can be installed): IEEE1284,
IEEE802.11a/g, IEEE802.11g, Bluetooth, Gigabit Ethernet,
SD Card Slots
SD Slot 1 is used for PictBridge, Data Overwrite Security Unit. Data Storage Card.
SD Slot 2 is used for installing the VM card or HDD Encryption Unit or one of the optional applications
for service only (for example, updating the firmware).
Controller Options
33
1

Table of Contents

Related product manuals