Controller
The controller uses GW (Ground Work) architecture.
• ASCI 1. GW architecture ASIC
• CPU. (RM7935-835MHz). The central processing unit that controls the operation of the controller
board.
• DDR SDRAM. The image memory (Resident: 256MB, Optional: 128MB or 256MB) image
compression, image rotation and other operations are done.
• SD. This is the interface for SD card slots 1 and 2. Slot 2 is for optional applications or service slot for
firmware version updates, moving. applications to other SD cards, and downloading/uploading
NVRAM contents
Controller
401
To Next Page
Loading...
