• Board Option Slot. Only one of the following options can be installed in either I/F Slot: IEEE1284
Interface Board (Centronics), IEEE802.11a/g, g (Wireless LAN), Bluetooth Interface Unit, Gigabit
Ethernet Interface Board.
• Flash ROM. Firmware area, work area for PDF direct print, VM card. Maximum capacity: 128 MB.
• USB. The interface for USB 2.0 devices. Supports both low-speed and high-speed modes. USB support
is built-into the controller. No installation is required for the USB function.
• NIB. The Ethernet interface connection. Network support is built-into the controller. No installation is
required for the network function.
• Boot ROM. Stores the boot program.
• NVRAM. The memory that stores the system configuration and user code.
• HDD. 2.5 inches HDD (option)
6. Detailed Function Descriptions
402
To Next Page
Loading...
