6. Harness [F] ( x 2, x 3)
7. Tray heater switch [G]
8. Tray heater [H] ( x 2, x 1)
• You can adjust the tray heater switch setting with SP5953-001 as shown in the following table.
SP5953-001 Tray heater switch When the Main Power turns on
When the printer is in energy
saver mode
0: Off
On No power supply Power supply
Off No power supply No power supply
1: On
On Power supply Power supply
Off No power supply No power supply
1. Installation Procedure
32
To Next Page
Loading...
