EasyManua.ls Logo

Ricoh G-P3 - Page 272

Ricoh G-P3
413 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
5846 064
Compl Opt3 *CTL [0 to 32 / 0 / 1 /step]
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to numbers and defines the length of the
password.
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
5846 065
Compl Opt4 *CTL [0 to 32 / 0 / 1 /step]
Use this SP to set the conditions for password entry to access the local address book.
Specifically, this SP limits the password entry to symbols and defines the length of the
password.
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a group password
policy to control access to the address book.
5846 094
Encryption Stat *CTL [0 to 255 / - / 1 /step] No default
Shows the status of the encryption function of the address book on the LDAP server.
5848 [Web Service]
5848 004 ac: UD *CTL
Enables or disables the undirectory access
limitation.
0000: Disabled, 0001: Enabled
5848 009 ac: Job Ctrl
Switches access control on and off.
0000: OFF, 0001: ON
5848 011 ac: Dev Mng *CTL
5848 022 ac:Uadmin *CTL
5848 210 LogType: Job 1 *CTL
Displays the log server settings.
These can be adjusted with the Web Image
Monitor.
5848 211 LogType: Job 2 *CTL
5848 212 LogType: Access *CTL
Service Mode Table
271
5

Table of Contents

Related product manuals