EasyManua.ls Logo

Ricoh G-P3 - Page 282

Ricoh G-P3
413 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7504 001 At Power On *CTL Not used
7504 003 Tray 1: Non-feed *CTL Tray 1: Paper is not fed.
7504 004 Tray 2: Non-feed *CTL Tray 2: Paper is not fed.
7504 005 Tray 3: Non-feed *CTL Tray 3/LCT: Paper is not fed.
7504 006 By-pass: Non-feed *CTL By-pass: Paper is not fed.
7504 007 Duplex: Non-feed *CTL Duplex: Paper is not fed.
7504 008 Registration *CTL Registration Senor does not get "ON".
7504 009 Fusing Exit *CTL Fusing Exit Sensor does not get "ON".
7504 010 Exit *CTL Paper Exit Sensor does not get "ON".
7504 011 Inverter (F) *CTL Duplex: ON
7504 012 Inverter (R) *CTL Duplex Jam Sensor 1 does not get "ON".
7504 013 Duplex Exit *CTL Duplex Jam Sensor 2 does not get "ON".
7504 015 Bank Paper Feed *CTL Optional Paper Feed Sensor does not get "ON".
7504 016 Fusing Entrance *CTL Fusing Entrance Sensor does not get "ON".
7504 017 Tray4: Non-feed *CTL
7504 018 Bank Paper feed2 *CTL
7504 061 Regist: Stay *CTL Registration Sensor does not get "OFF"
7504 063 Exit: Stay *CTL Paper Exit Sensor does not get "OFF".
7504 065 Inverter (F): Stay *CTL Duplex: OFF
7504 066 Inverter (R): Stay *CTL Duplex Exit 1: OFF
7504 070 Bank Paper 1: Stay *CTL Not used
7504 071 Bank Paper 2: Stay *CTL Not used
7504 072 Bank Paper 3: Stay *CTL
7506 [Paper Jam/Size]
7506 006 A5 LEF *CTL
Displays the number of jams according to the paper
size.
Service Mode Table
281
5

Table of Contents

Related product manuals