91
more on PhotograPhy
• ISO (value): The camera shoots with the selected ISO
value. Available ISO values dier depending on the
camera unit. See the documentation provided with the
camera unit for details.
The current sensitivity is shown
in the picture display (if Auto or
Auto-Hi is selected, the sensitivity
selected by the camera is shown
when the shutter-release button
is pressed halfway).
1
Select an ISO sensitivity option.
Press + or – to select an option.
2
Shoot or return to the shooting mode.
Press the shutter-release button to take a picture, or
press C/D to return to shooting mode.
Notes
• Options for
ISO setting can be displayed by pressing the ADJ.
lever (page
134).
• The sensitivity when using the ash and the range of available
sensitivities dier depending on the camera unit. See the
documentation of the camera unit for details.
• “Noise” (random variations in brightness and color) may appear
in photographs taken at high sensitivities.
Restore Defaults
To restore default shooting menu settings (page 59),
rotate the mode dial to 5 and select Restore Defaults
in the shooting menu. A conrmation dialog will be
displayed; highlight Yes and press C/D to restore
default values and exit to shooting mode.
To Next Page
Loading...
